Spotted: TS Parts And Accessories For Sale

[zebedee]

Haha .. maybe worth investigating for hard-to-locate outboard parts.

Ad says, "Outboard parts all models . Let me know what you need. Mercury. Evinrude. Chrysler. Suzuki. Listed 5 weeks ago in Redesdale, VIC"

https://www.facebook.com/marketplace/it ... 726427331/

Facebook images are cunningly protected from linking; basically you have to open them in a new tab, then save the image to actually get access to the jpeg, which you can then attach here:

[zebedee]

Apparently some people can see the original image and some cannot.
I'm using firefox which isolates facebook in its own "container" and will not display facebook content including images in ordinary tabs to protect privacy. This prevents facebook tracking you into TSP and elsewhere.

[Wanton]

Hi everyone. I am in the process of upgrading my Raymarine electronics. I will have a wind close haul I60 Display for sale. The depth speed log kicked the bucket so upgrading both instruments because of water ingress last rain storm. Seatalk Compatable of course.

[Waterd]

Timpenny 670 mast, good sails etc. - $offers - Baulkham Hills NSW

https://www.gumtree.com.au/s-ad/baulkha ... 1288431576

Sent from my SM-A525F using Tapatalk

[guzzis3]

If anyone sees a big mast for sale I would very much appreciate a heads up. Preferably in SEQ but I'm going to have to get it transported anyway..

11800 long 180x120 section.

I know there is one that's close on gumtree but unfortunately it's a bit short...

A bit too big is better than a bit too small...

[Mojo]

If anyone sees a big mast for sale I would very much appreciate a heads up. Preferably in SEQ but I'm going to have to get it transported anyway..

11800 long 180x120 section.

I know there is one that's close on gumtree but unfortunately it's a bit short...

A bit too big is better than a bit too small...

Are you moving ahead with the boat build?


Sent from my iPhone using Tapatalk

[guzzis3]

Thank you for your interest. Yes, but it's worse than that. I've gone up a size.

I am hoping to build the woods saturn design. The boat can be made trailerable, and worse I'm planning to stretch it 10%, so a 32' trailerable catamaran

Having said that I've been having health catastrophies about every 2 years for the last decade, so I'm about due again. Maybe this one will kill me..

[Johny]

I have an Arovec Arodry-900 dehumidifier as new in box for sale.
We bought this for our Avan to try to help with dripping water during Caravanning in winter.
It was pretty useless as it was competing with a huge amount of freezing cold aluminium framing that brings cold from the outside to the inside of the van. Obvious on retrospect I guess.
That said, it works fine and collects moisture out of the air quite well when used correctly.

It runs off a 9V 2.5A plugpack from 240VAC so it's not terribly easy to run from 12V.
https://www.arovec.com.au/products/arov ... humidifier
We paid around $80 but happy to get back $40 $30 or reasonable offer accepted.
Hope to be down at Gippsland Lakes in Feb else pickup at
Eastern suburbs of Melbourne.
Postage would be around $16, depending on location.
PM if interested.

[guzzis3]

Are you moving ahead with the boat build?


Sent from my iPhone using Tapatalk

That's the plan. I thought about it a lot and while I may have to hire someone to launch and recover it once a year it's still better having it at home than on a mooring.

[zebedee]

HONDA 2 HP FOUR STROKE AIR COOLED BF2D OUTBOARD MOTOR. Mount Martha (Melbourne), $450

Ideal tender outboard,

https://www.ebay.com.au/itm/203805311047

[bachus]

Huntsman are getting rid of used axles. 45mm 1400kg rated.

https://www.ebay.com.au/itm/36257378553 ... SwLqRcfu15

$100 each.
The fact they are fitted with DeMax brake caliper brackets may assist anyone upgrading from single axle to dual axle braked trailer.

Edit 45mm

[rseydler]

If anyone is thinking of offloading a 4hp or higher outboard do keep me in mind. I haven't officially started looking, just keeping an eye out

[guzzis3]

I've got an old evinrude, or johnson (can't remember) 6hp with a 4hp cowling. The previous owner was being naughty. I paid $80, no tank. Short shaft so no use to me.

It's late 70's but looks fairly well maintained.

[rseydler]

Thanks. Apparently short shaft is a no no. I heard a rumor that the police were fining people up the coast for the numbers swap. It's all visible on the serial number plate, if that is still attached of course

[guzzis3]

Yep, and I wouldn't do it. He pretty much begged me to take the motor.

There are 2 problems with cats which you probably already know. Unless the motor is behind a transom you need more depth to combat cavitation. There have been all sorts of weird and wonderful solutions but the easiest is to go deep. The second problem is they hobbyhorse readily...

Personally I'd stick a 4 long on it and decline rego. $350/yr you needn't give the government. A high thrust prop is well worth looking for.

[granty]

Hi everybody,sold my Ultimate 18 today,end of an era after sixteen years of ownership. I have a Garmin 12XL handheld GPS for sale in perfect condition ,i have looked around to get an approx price on what it is worth, all i could find was U.S.A.adverts ,anybody know what to ask price wise? Cheers David.

[MoodyBlue]

Hi everybody,sold my Ultimate 18 today,end of an era after sixteen years of ownership. I have a Garmin 12XL handheld GPS for sale in perfect condition ,i have looked around to get an approx price on what it is worth, all i could find was U.S.A.adverts ,anybody know what to ask price wise? Cheers David.

Sorry to say this David, but a little over 10 years ago I paid $20 for a 12XL which I still have. It even has it's original box and packaging.